Will it fit?

Three numbers and you have your answer. Measure the gap beside your bed, the depth you can give up, and the distance from your floor to the top of your mattress. Everything on this site is checked against them, in centimetres.

Measurements are the maker's published figures. We leave a 2 cm working margin on width and depth, because a table you have to force into a gap is a table you will hate. Wall-mounted pieces are matched on width and depth only: their height is wherever you fix them.

What the numbers mean

Height is the one people get wrong. A bedside table should sit level with the top of your mattress, or very slightly above it. More than about ten centimetres below and you are reaching down in the dark every night; more than about five above and it is in the way when you sit up.

We recorded the published dimensions of 262 floor-standing bedside tables in one British trade range: median height 57 cm, two thirds between 55 and 65 cm, and only 2 % reaching 65 cm. The 61 to 71 cm figure repeated online fits just 15 of those 262 tables (6 %). The full study and the chart are here, free to republish with a credit link.

Width is the one people underestimate. Read the width of the gap at its narrowest point, not at the widest, and remember a radiator valve sticks out further than the radiator. If nothing fits, the bedside table alternatives show what does, in centimetres.

Use this tool on your own site

You are welcome to link to this page from a student accommodation guide, a small-space article or a moving checklist. It is free, there is nothing to sign up for, and it works on a phone.

Before you buy

How to choose a bedside table

Three measurements decide it, in this order. Take them with a tape measure before you look at a single photo.

1

Width: the gap beside your bed

Measure from the side of the bed frame to the wall, radiator or wardrobe, at the narrowest point. Skirting boards and radiator valves count. Take 2 cm off: that is the widest table that fits without forcing it.

Your gap and the widest table that fits
Gap beside the bedWidest tableWhere to look
Under 22 cmNothing we sellAlternatives
22 to 31 cm20 cm20 cm tables
32 to 37 cm30 to 35 cm30 cm tables
38 to 46 cm36 to 44 cmAll tables
47 to 56 cm45 cmAll tables
57 cm or more55 cmAll tables

2

Height: floor to the top of your mattress

Stand a tape measure on the floor and read it at the top of the mattress, topper included. The table should sit level with that point, within about 5 cm. Lower and you reach down in the dark; higher and it gets in the way when you sit up.

Typical mattress heights by British bed type
BedFloor to mattress topTable height
Divan base55 to 65 cm55 to 60 cm
Ottoman, lift-up storage55 to 70 cm57 to 60 cm
Upholstered frame50 to 60 cm50 to 57 cm
Platform or low frame40 to 50 cm40 to 50 cm
Bunk or cabin bed, lower berth35 to 45 cm35 to 45 cm

Your own measurement always wins over a typical range. The height guide explains why.

3

Storage: drawer, shelf or wall

  • A drawer hides the phone, glasses and cables. It pulls out towards you, so it needs room in front, not at the sides. 36 of our 49 tables and sets in stock have at least one.
  • An open shelf or slot keeps a book or a glass within reach, with nothing to open in the dark.
  • Wall mounted keeps the floor clear for a radiator, a socket or a vacuum, and you fix it exactly at mattress height. See wall-mounted tables.

Side by side

How do our bedside tables compare?

Every table in stock today, grouped by width. Heights are for floor-standing tables; a wall-mounted one sits wherever you fix it.

Swipe the table sideways to see every column.
TypeIn stockWidthHeightDepthWith a drawerFrom
20 cm wide 3 20 cm 40 cm 20 cm 3 of 3 £101
30 to 35 cm wide 11 30–35 cm 20–57 cm 25–30 cm 8 of 11 £112
36 to 45 cm wide 16 36–45 cm 20–61 cm 25–40 cm 11 of 16 £112
Wider than 45 cm 5 46.5–55 cm 53–61 cm 38–43 cm 5 of 5 £149
Wall mounted 11 30–45 cm Where you fix it 25–35 cm 9 of 11 £104
Sets of two 3 30–40 cm 40–50 cm 25–40 cm 0 of 3 £224

Width, depth and height are the maker's published figures, in centimetres. Prices include free UK delivery.

Names explained

Bedside table, cabinet, drawers or nightstand?

Shops use five names for nearly the same piece of furniture. What changes is the storage, and how it stands.

Bedside table
The general name: a small table at the side of the bed, with or without storage. Everything we sell is one.
Bedside cabinet
A bedside table with enclosed storage, usually a drawer or a door. 36 of the tables and sets we have in stock have at least one drawer: see our bedside cabinets.
Bedside drawers
Two or three drawers stacked, like a small chest. Ours with the most: three drawers in a 45 cm wide table.
Nightstand
The American word for a bedside table. Same piece, same measurements to check.
Floating bedside table
Another name for a wall-mounted one: fixed to the wall, with nothing on the floor. See them.

Or start from the room

If you are furnishing a small bedroom from scratch, the gap beside the bed is not something you measure — it is something that is left over. Put the room in and see what remains.

Bed lengths used: 190 cm for single, small double and double; 200 cm for king and super king. A standard internal door sweeps about 76 cm, so check the door arc before you trust any of this — it is the constraint people forget.